Create a Bootable USB Flash Drive

 

1. Insert a USB flash drive into a running computer.
2. Open a Command Prompt window as an administrator.
3. Type "diskpart".
4. In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type "list disk", and then click ENTER. The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.
5. At the command prompt, type "select disk <X>", where X is the drive number or drive letter of the USB flash drive, and then click ENTER.
6. Type "clean" and the click ENTER. This command deletes all data from the USB flash drive.
7. To create a new primary partition on the USB flash drive, type "create part pri", and then click ENTER.
8. To select the partition that you just created, type "select part 1", and then click ENTER.
9. To format the partition, type "format fs=ntfs quick", if your flash drive type FAT32 then type  "format fs=fat32 quick",  and then click ENTER.
10. Type "active" and click ENTER.
11. Type "exit" and click ENTER.
12. Copy the windows file into the flash drive and then refresh it.

Please comment down below if you have any query we will surely try to resolve it within 24 hours.....